Products

The characteristics determined by the partial pressure of water vapor in compressed air and the temperature of compressed air are used for cooling, dehydration and drying. While keeping the compressed air pressure basically unchanged, lowering the temperature of the compressed air can reduce the water content in the compressed air, and the excess water vapor will condense into liquid. The refrigerated dryer uses this principle to dry compressed air using refrigeration technology, so the refrigerated dryer has a refrigeration system. CMN has such perfect refrigerated air dryers for sale. CMN refrigerated air dryers for air compressor are not only efficient in the working process but also cost-effective. Please CONTACT US.

Relying on the low operating temperature of the air end, CMN, the hydrogen compressor manufacturers and suppliers, has developed a unique screw hydrogen compressor with a flow range of 5 to 59m3/min and a pressure range of 4 to 45bar. Since water is directly injected into the air end for compression, the operating temperature of the host will usually not be higher than 45 degrees Celsius, so safety can be guaranteed.

Thermal adsorption type - uses part of the dried compressed air to purge the adsorbent after decompression to achieve "regeneration" of the adsorbent; Microthermal adsorption type - the difference from the non-thermal adsorption type is that the compressed air used for purging is heated by an electric heater.

Coalbed methane compressor are mainly devices with water injected screw compressors as the air end, which are used in coal mine gas recovery, natural gas secondary recovery, oil fields, refineries, natural gas chemical plants, vinylon plants, chemical fiber plants and other petrochemical enterprises , as well as combustible gas recycling at liquefied gas stations and strategic combat readiness oil depots.
This product can not only recycle energy, but also significantly reduce environmental pollution. It has reliable quality, good cost performance, and is highly competitive in the domestic market. So far, coalbed methane recovery devices have been promoted and applied in petrochemical enterprises such as oil fields, refineries, natural gas chemical plants, vinylon plants, and chemical fiber plants. As a natural gas compressor manufacturer, CMN provides excellent compressors that effectively reduce pollution.

CMN oil-free carbon dioxide reciprocating compressor, the air end is made of 304 stainless steel. If there are special requirements for the co2 screw compressor, 316 stainless steel can also be used to prevent corrosion. The inlet pressure, outlet pressure, and exhaust volume can be designed as required.

The working principle of the pure oil-free screw compressor is the same as that of the normal pressure oil-free screw air compressor. The difference is that the low-pressure screw air compressor is equipped with a low-pressure stainless steel air end with a compression ratio of 1.2 to 4, and the air supply pressure of the unit is 1.2 to 4 bar. The unit has good stability and low energy consumption.