Products

CMN oil-free carbon dioxide reciprocating compressor, the air end is made of 304 stainless steel. If there are special requirements for the co2 screw compressor, 316 stainless steel can also be used to prevent corrosion. The inlet pressure, outlet pressure, and exhaust volume can be designed as required.

Coalbed methane compressor are mainly devices with water injected screw compressors as the air end, which are used in coal mine gas recovery, natural gas secondary recovery, oil fields, refineries, natural gas chemical plants, vinylon plants, chemical fiber plants and other petrochemical enterprises , as well as combustible gas recycling at liquefied gas stations and strategic combat readiness oil depots.
This product can not only recycle energy, but also significantly reduce environmental pollution. It has reliable quality, good cost performance, and is highly competitive in the domestic market. So far, coalbed methane recovery devices have been promoted and applied in petrochemical enterprises such as oil fields, refineries, natural gas chemical plants, vinylon plants, and chemical fiber plants. As a natural gas compressor manufacturer, CMN provides excellent compressors that effectively reduce pollution.

Relying on the low operating temperature of the air end, CMN, the hydrogen compressor manufacturers and suppliers, has developed a unique screw hydrogen compressor with a flow range of 5 to 59m3/min and a pressure range of 4 to 45bar. Since water is directly injected into the air end for compression, the operating temperature of the host will usually not be higher than 45 degrees Celsius, so safety can be guaranteed.

The air storage tank can store a certain amount of compressed air, to make sure that the pressure of output air is relatively stable. It can also reduce the temperature in the air path and remove some water, dust, and impurities. The air storage tank is made of high-quality materials(carbon steel or stainless steel) and uses advanced welding technology. CMN air receiver tank for sale has passed ISO9001 certification and can pass any safety inspection.

Pure water instead of lubricating oil is used in the air end for lubrication. The air end and all parts in contact with water are made of 304 food-grade stainless steel. Compressed air passes the TUV oil-free test and also meets the requirements of the FDA and GMP. With no oil in the whole water-injected screw compressor, maintenance is simple and only requires the replacement of the air and water filter. Water-injected screw compressor adopts a direct coupling method between the air end and the motor, resulting in high transmission efficiency. The water-injected compressor unit operates at an exceptionally low temperature, typically around 45 degrees Celsius, ensuring efficient cooling and energy use.

The characteristics determined by the partial pressure of water vapor in compressed air and the temperature of compressed air are used for cooling, dehydration and drying. While keeping the compressed air pressure basically unchanged, lowering the temperature of the compressed air can reduce the water content in the compressed air, and the excess water vapor will condense into liquid. The refrigerated dryer uses this principle to dry compressed air using refrigeration technology, so the refrigerated dryer has a refrigeration system. CMN has such perfect refrigerated air dryers for sale. CMN refrigerated air dryers for air compressor are not only efficient in the working process but also cost-effective. Please CONTACT US.