Products

Relying on the low operating temperature of the air end, CMN, the hydrogen compressor manufacturers and suppliers, has developed a unique screw hydrogen compressor with a flow range of 5 to 59m3/min and a pressure range of 4 to 45bar. Since water is directly injected into the air end for compression, the operating temperature of the host will usually not be higher than 45 degrees Celsius, so safety can be guaranteed.

Pure water instead of lubricating oil is used in the air end for lubrication. The air end and all parts in contact with water are made of 304 food-grade stainless steel. Compressed air passes the TUV oil-free test and also meets the requirements of the FDA and GMP. With no oil in the whole water-injected screw compressor, maintenance is simple and only requires the replacement of the air and water filter. Water-injected screw compressor adopts a direct coupling method between the air end and the motor, resulting in high transmission efficiency. The water-injected compressor unit operates at an exceptionally low temperature, typically around 45 degrees Celsius, ensuring efficient cooling and energy use.

The air storage tank can store a certain amount of compressed air, to make sure that the pressure of output air is relatively stable. It can also reduce the temperature in the air path and remove some water, dust, and impurities. The air storage tank is made of high-quality materials(carbon steel or stainless steel) and uses advanced welding technology. CMN air receiver tank for sale has passed ISO9001 certification and can pass any safety inspection.

CMN oil-free high-pressure screw air compressor, with an air supply pressure of 20 to 40 bar, can be adapted to high-standard gas processes such as PET bottle blowing and blow molding. The whole high-pressure oil-free air compressor does not contain any lubricating oil to ensure that the outlet compressed air is oil-free. The screw-type air end performs two-stage compression with low vibration and noise. As one of the best oil free compressor suppliers, CMN oil-free high-pressure air compressor adopts an advanced two-stage dual-drive design and is equipped with two permanent magnet variable frequency motors with an efficiency of up to 97%. The inverter drive always supplies air with optimal efficiency. Maintenance is simple, only the air filter and water filter need to be replaced, reducing maintenance costs by 50% to 80%.

The high-pressure micro oil screw air compressor crafted by CMN has an air supply pressure of 20 to 45 kg. The air end is lubricated with high-quality lubricating oil and has two stages screw compression air end, which can be adapted to most high-pressure compressed air supplies.

Thermal adsorption type - uses part of the dried compressed air to purge the adsorbent after decompression to achieve "regeneration" of the adsorbent; Microthermal adsorption type - the difference from the non-thermal adsorption type is that the compressed air used for purging is heated by an electric heater.