Products

Relying on the low operating temperature of the air end, CMN, the hydrogen compressor manufacturers and suppliers, has developed a unique screw hydrogen compressor with a flow range of 5 to 59m3/min and a pressure range of 4 to 45bar. Since water is directly injected into the air end for compression, the operating temperature of the host will usually not be higher than 45 degrees Celsius, so safety can be guaranteed.

The working principle of the pure oil-free screw compressor is the same as that of the normal pressure oil-free screw air compressor. The difference is that the low-pressure screw air compressor is equipped with a low-pressure stainless steel air end with a compression ratio of 1.2 to 4, and the air supply pressure of the unit is 1.2 to 4 bar. The unit has good stability and low energy consumption.

The characteristics determined by the partial pressure of water vapor in compressed air and the temperature of compressed air are used for cooling, dehydration and drying. While keeping the compressed air pressure basically unchanged, lowering the temperature of the compressed air can reduce the water content in the compressed air, and the excess water vapor will condense into liquid. The refrigerated dryer uses this principle to dry compressed air using refrigeration technology, so the refrigerated dryer has a refrigeration system. CMN has such perfect refrigerated air dryers for sale. CMN refrigerated air dryers for air compressor are not only efficient in the working process but also cost-effective. Please CONTACT US.

Pure water instead of lubricating oil is used in the air end for lubrication. The air end and all parts in contact with water are made of 304 food-grade stainless steel. Compressed air passes the TUV oil-free test and also meets the requirements of the FDA and GMP. With no oil in the whole water-injected screw compressor, maintenance is simple and only requires the replacement of the air and water filter. Water-injected screw compressor adopts a direct coupling method between the air end and the motor, resulting in high transmission efficiency. The water-injected compressor unit operates at an exceptionally low temperature, typically around 45 degrees Celsius, ensuring efficient cooling and energy use.

CMN oil-free carbon dioxide reciprocating compressor, the air end is made of 304 stainless steel. If there are special requirements for the co2 screw compressor, 316 stainless steel can also be used to prevent corrosion. The inlet pressure, outlet pressure, and exhaust volume can be designed as required.

The high-pressure micro oil screw air compressor crafted by CMN has an air supply pressure of 20 to 45 kg. The air end is lubricated with high-quality lubricating oil and has two stages screw compression air end, which can be adapted to most high-pressure compressed air supplies.